Volumes #6 Multi Angle

2 review(s) | Add your review

$121.85

Great for making low angled walls steeper.

Wall Type *

Hardware *

Single Hold Colors *

T-Nut Type *

Standard T-Nut
Stainless Steel 3/8-16 T-nut [+$3.56]
Metric 10mm

Overview
Reviews

The attraction for the home waller to this volume might be its multi-angles. A quick rotation on the wall will change to the angle you are looking for. The angles it offers are 30, 40, 50, and 65 degrees. A quick way to envision those numbers, putting Volume #6 on a 30, 40, 50, or 65-degree overhanging wall, you will get one side that will be vertical.

Base Dimensions: 12" x 8" x 12" x 10"

Stands out from the wall: 5'"

T-nuts installed: 4 round base brad hole t-nuts

Attachment method: 1 bolt and 4 screws.

Angles: The angle of each panel is 30, 40, 50, and 65 degrees.

Please do not drill spinner screw holes or any other holes into Polyurethane Volumes. You can weaken the structural integrity of the product. This practice also voids our warranty.

Good smallish volume, should've paid more attention to color

I got this for my home climbing wall to add some angle (the wall is vertical). It's nice, but not very big (as it's not being advertised as such either). Has a nice grippy texture so can be used as a part of the wall for climbing - your shoes will easily hold on to it without slipping.

I got a green one, and the only thing I should've watched out for is would've been to get a more neutral color (like gray) - it stands out way too much and really looks like a large hold - so if you want this just to add a different surface to your wall, you might want to get it in a neutral color. Great product nevertheless!

Date: 2/12/2020 3:19 PM

Was this review helpful? Yes No (0/0)

Nice big sides

This is still a mini volume, but its large sides can accommodate a wide variety of holds, and we appreciate that! Very easy to install and move; similar texture to many of Atomik’s holds, though it is rougher than the Golfus volumes. We have installed it on a vertical wall and it is working well to add some interest and new angles.

Date: 4/17/2021 12:07 PM

Was this review helpful? Yes No (0/0)

Base Dimensions: 12" x 8" x 12" x 10"

Stands out from the wall: 5'"

T-nuts installed: 4 round base brad hole t-nuts

Attachment method: 1 bolt and 4 screws.

Angles: The angle of each panel is 30, 40, 50, and 65 degrees.

Please do not drill spinner screw holes or any other holes into Polyurethane Volumes. You can weaken the structural integrity of the product. This practice also voids our warranty.

Also Bought

Volumes #6 Multi Angle

T-nut (Round Base Zinc)

STAINLESS STEEL T-nut (4-Prong SS)

2" Indoor Allen Head Bolt

1-1/2" Indoor Allen head Bolt

Large Ring 1-1/4" ( Down Climbing Hold )