Ring Toss Knob (Choose one or five)

This product has been designed so that you can build your own Ring Toss Obstacle. The knob measures 2-1/2", the shaft 1-1/2", and the base plate is 1" thick. There are six recessed attachment locations. The recesses are 5/8" OD so that when the ring loops over the knob, the ring will not graze the screw.    

• Available in 39 colors. 
• Wood/Resin rings are NOT included. 
• Hardware is not included. 
• Baseplate measures 4-1/4" OD. 
• Knob measures 2-1/2".  
• Shaft measures 1-1/2".  
• Stands off the wall 5." 

We don't currently sell hardware for this product as there are many types of material you can attach them to.  For installation onto solid wood surfaces such as beams, we recommend the GRK 5/16" Structural Screws. We recommend at least a 2-1/2" embedment. If you are attaching to a solid wood beam, you should use a 3-1/2" to 4" long screw. See below for a photo example of the recommended screw for attaching to a solid wood beam. 

For installation onto thinner surfaces such as metal, we recommend a through-bolt setup with 5/16" bolts, washers, and nuts. Below is one example of the hardware to use.