12 Medium Double Incut Roof Jugs

Some of my favorite holds to set on steep walls! The double incut makes them massively comfortable and the easiest holds to use when the going gets steep. Bonus fun as cool holds to jump, catch, and swing on!

I bought these thinking they would be slightly bigger.  The carabiner for scale is spot on.  They are fantastic, incut, and comfy holds for the size.  I would possibly buy the larger version to use on a roof though.  These are great, but it depends on how high your ceiling is if you would feel secure on them as a beginner.

The double incut is deep. These are comfy and big enough for an adult. I've got two different kid climbs out of this one set on a vertical wall. Good for a small finish hold or a two handed start.

These are very easy to hang onto on a 50 degree overhanging wall; I use them for V2ish routes and for practice campusing. They're like climbing a ladder if you put them on a vertical wall. They are also my first choice of holds when setting routes on my ceiling. Easily wide enough to fit four fingers of a single hand in, but it'd get crowded if you tried to match hands on a single hold.

The only complaint I have is that the lip of the hold that you grab onto is a little narrow so they don't feel terribly substantial in your hands. They are not as comfortable to hang onto as larger jugs and can start to hurt your fingers if you spend enough time on them.

These are very forgiving deep incut jugs that are very comfortable to use. Perfect set for establishing easy routes when learning to climb.

Awesome easy roof jugs. One recommendation is that I would not use these as easy warm up jugs except for on a roof. I have a 40 degree wall and wanted a bunch of jugs for circuits. The double incut on these is painful on the middle finger joint when used for endurance circuits. I ended up switching these out for normal, wider lipped jugs for my circuits and am now using these roof jugs as side pulls and underclings. This was my noob mistake though, and not the fault of atomik. When used for their intended purpose, they are great!

I have tried this holds both on the 45 degree section and the roof section of my wall.  The description is right that they are a bit uncomfortable on less overhanging sections (even 45 degree in my opinion).  I like them on the roof section of my wall for longer problems.  While I haven't found that they work well for hand-foot matching, they do work well for toe hooking.  There is some variety in the size of each hold, but as the description says they all work well with three-finger open handed grips.

Nice positive holds. Using on 10 and 35 degree walls and works well for our 7 year olds and the adults.

Amazing value for the set, made for great one-hand fillers to help ease some roof problems for warming up etc. The holds are a little different in size from piece to piece, and some felt a little thin for my taste, or pushed into my tendon at an awkward angle, but I moved those to a 25 wall without issue.

Great holds that everyone needs. They are great and comfortable to get all your fingers in and especially just starting out, these are perfect. We actually use these the most out of any holds so we will definitely need another set!

Such a nice, deep jug with a comfortable texture for overhang climbing. They’re wonderful for longer endurance climbs and can easily be used for heel hooks as well. I made an “overhang” roof in my basement by attaching holds vertically to the ceiling rafters. Since these are installed vertically on my wall, they feel quite different and are probably easier than if one installed them horizontally on a true climbing roof.

I purchased these on Amazon in early March 2020, which was fortunate for two reasons: I was able to start building a home climbing wall right as the country was going into lockdown, and I found out about Atomik. I have since made dozens of purchases from this company and am so happy with their products. I haven’t made a single regrettable purchase.

The company president, Kenny Matys, is one of the most ethical and conscientious businessmen I’ve encountered. He has managed the COVID order overflow with exceptional grace and efficiency. By all accounts, he has endeavored to treat his employees fairly during this period of time (offering significant overtime and breaks) while also stemming the flow of orders to ensure efficient turn around time, exceptional production standards, and reasonable work conditions for his crew. When I’ve reached out with questions, he has been prompt with his response despite being inundated with orders. Orders have all arrived on time or earlier than expected. Product quality has not suffered despite increased production volume. I’ve ordered from several other major companies during this time and none have come close to living up to the standards at Atomik. Please support this business!!! You won’t be disappointed.

We have a 45 and 60 degree wall and put them up on each. I was scared they would bite too much on the 45 but they work really well and you don't really notice the lip unless they are straight down pulling. Perfect for the 60 in anything from V1 to V4. There is one hold in the set that is too tight if you have big fingers, and it is pretty painful to use because it locks your knuckles against the wall, but that was the only issue that arose with these holds for me.

Excellent holds very well made and thought out.
I use them on a 45 degree wall and can traverse on them without feet if I wanted. The double incut is a must have for steep walls

These holds are great and deep. I am 6' and have big hands and can get all my fingers inside. My wife really loves these as well. We have a 30 degree, roof section and a vertical section the holds work great on. Only bad thing they have a little lip or bump on the edge that is smooth but seems to really dig into your hands if you grab them wrong. You get a lot for the price.