1/2" Low Angle Crimp Tiles ( Set of 2 )

$14.51

1/2" deep edge. Incuts are 80, 90, 100, 110 degrees. Measures 3 1/2" x 3 1/2". Sold as a set of 2.

Wall Type *
Hardware *
Single Hold Colors *

Overview
Reviews

The edge is 1/2" deep. The the incuts are 80 degrees ( incut ), 90 degrees ( flat ), 100 degrees ( slightly slopey ) and 110 degrees ( slopey ). Great as a hangboard hold.

Sold as a set of 2

Great Deal for a training hold.

A four-holds-for-one-price type of hold. If the hold feels too positive, rotate it until you have the right amount of challenge. This small training hold is currently my misery crimp. When you're pumped out on your hangboard doing an open crimp, there is just enough positivity to pinch the thumb around its side and stay on a little longer.

Date: 3/31/2020 10:03 AM

Was this review helpful? Yes No (0/0)

Great on my hangboard setup

Awesome for my hangboard setup. 4 slightly different edges. Not much more to say.

Date: 2/19/2021 11:16 PM

Was this review helpful? Yes No (0/0)

The edge is 1/2" deep. The the incuts are 80 degrees ( incut ), 90 degrees ( flat ), 100 degrees ( slightly slopey ) and 110 degrees ( slopey ). Great as a hangboard hold.

Sold as a set of 2

Also Bought

INDUSTRIAL Round Base T-nut (Zinc)

The t-nut to choose for commercial high use, steep walls, and roof sections.

$0.36

2-1/2" Indoor Allen Head Bolt

3/8-16 x 2-1/2" Indoor rated allen head bolt

$0.49

1-1/2" Indoor Allen head Bolt

3/8-16 x 1-1/2" Indoor rated allen head bolt

$0.39

3/4" Low Angle Crimp Tiles ( Set of 2 )

3/4" deep edge. Incuts are 80, 90, 100, 110 degrees. Measures 3 1/2" x 3 1/2". Sold as a set of 2.

$14.51

System Feet - #7 (Bolt-on) (Set of 2)

#7 is an oval cobble. It is barely sloping so you could almost call it flat on the wide side. It's a great intermediate to advanced hold in steep terrain. On the short side the angle is about 135 degrees sloping so on vertical, no problem. On a steep wall, the short side gets considerably hard to stand on. Sold as a set of 2.

$7.64