HB Sloper 90° (Bolt-On) (Set of 2)

$32.32

The 90 is a flat ledge. It has a small foot print making it a great choice for hangboards. Sold as a set of 2.

Wall Type *
Hardware *
Single Hold Colors * SEE COLOR CHART

Reviews

Simple pinch-sloper for steep walls

I set these on my 35 degree wall with a combination of the HB sloper 100 and the system feet #8. This combination of holds on a 35 degree wall yields V5+. Compared to the HB 100, on a wall at this angle, the HB sloper 90 is a lot easier to hold. They are small enough that you can pinch them, too, but they still require some focus to hold on a steep angle, especially if you are standing on the system feet #8. A good medium-sized hold for the crowded spray wall.

Date: 8/4/2021 7:45 PM

Was this review helpful? Yes No (1/0)

Also Bought

2-1/2" Indoor Allen Head Bolt

3/8-16 x 2-1/2" Indoor rated allen head bolt

$0.49

T-nut INDUSTRIAL Round Base (Zinc)

The T-nut to choose for commercial high use, steep walls, and roof sections.

$0.36

System Feet - #9 (Bolt-On) (Set of 2)

#9 is a half inch edge, flat and requires body tension as the wall gets steeper. Sold as a set of 2.

$8.75

T-nut (4-Prong Zinc)

$0.14

System Feet - #7 (Bolt-On) (Set of 2)

#7 is an oval cobble. It is barely sloping so you could almost call it flat on the wide side. It's a great intermediate to advanced hold in steep terrain. On the short side the angle is about 135 degrees sloping so on vertical, no problem. On a steep wall, the short side gets considerably hard to stand on. Sold as a set of 2.

$12.48