Dry Tooling 5 Medium Facet Crimps (Vertical)

Flat edges for vertical terrain.

Wall Type determines the required bolt length needed to pass through the hold and the climbing wall. If you are not purchasing hardware, this option doesn't matter.



  • WALL ANGLE: Useful on vertical walls or volumes with vertical to slopey planes. 
  • SIZE: The smallest hold's footprint is 4" wide x 3" tall x 1-1/2" standing off the wall. 
  • SIZE: The largest hold's footprint is 7-1/2" wide x 4" tall x 1-1/2" standing off the wall.  
  • DURABILITY: A custom mix of fine-grain crushed stone and polyurethane resin to resemble the hardness of natural limestone rock. The result is a "hard" resin surface that tolerates the sharpness of ice-climbing axes. 
  • DISCLAIMER:  Use Drytooling resin holds only with your picks, not your crampons. This product does wear. 
  • RESPONSIBILITY: Please be aware that it is unacceptable to drytool at your local crag. Drytooling damages natural rock. You should drytool only in places where the local community has dedicated the area and never on established rock climbing routes. 


This set consists of edges with a neutral incut that are big enough to match. They become increasingly more difficult beyond vertical terrain.

The built-in backing plate is a nice feature to save your wall. The space above the edge ranges from 1/2" to 1-1/2" to the base of the hold. 

We have this set in a Steep Wall Version and a Dimpled Version which are both more positive than this Vertical model.