Tetris Block that has 9 attached sections.
*

Wall Type determines the required bolt length needed to pass through the hold and the climbing wall. If you are not purchasing hardware, this option doesn't matter.

*
* SEE COLOR CHART

Overview

The Tetris line of holds requires a custom bolt pattern. This pattern will not match any existing T-nut patterns. The incut on this hold is 1" deep and is present around the entire outside edge of the hold. 

Each Tetris block measures 5" x 5". The stand-off piece behind the face is 1" thick and the face is 1" thick. The hold stands off the wall 2". 

Tetris Block #5 has 9 connected blocks. 

Tetris Block #5 width measures 15" wide x 30" tall. 

Tetris Block #5 stands off the wall 2". 

Products specifications

Total Holds1