- 3/8-16 zinc round base t-nuts.
- 3/8 t-nuts attach using three #6 x 5/8" Zinc screws which are included.
- Drill a 7/16" hole from the front of the panel through to the back. Install t-nut on the backside of the panel.
- 2000 t-nuts per case.
- 6060 x #6 x 5/8" wood screws included.
- +/- 1426 pounds of force is required to pull the t-nut through a 3/4" AC Grade plywood panel.
Click here to read about Zinc versus Stainless Steel.
Click here for T-NUT LAYOUTS