System Crimps #9 (Bolt-on) (Set of 2)

$4.89

An incut version of Crimper/Edge #8. Great to train thumb crimping on. Works well on system walls for the intermediate to advanced level climber.

Sold as a set of 2.

Wall Type *
Hardware *
Single Hold Colors *

Reviews

Good Incut 3 finger crimps

These crimps are great addtion if your looking for a positive, about a pad deep 3 finger crimp. However, If you've got smaller hands you might be able to squeak the pinky on. I've got these on my 30 degree wall and they work well, both adding some difficulty and variety. Also can be seconded as a good foot chip if you don't like it as a hand.

Date: 4/28/2020 2:27 PM

Was this review helpful? Yes No (0/0)

One of my favorite crimps

One of my favorite crimps on the wall. Put them on my 35 degree board and love them. Just big enough for me to jam the pinky in. Really good small holds for the price for a bit steeper boards

Date: 5/18/2020 11:06 PM

Was this review helpful? Yes No (0/0)

Outstanding crimp

Awesome crimp which I have used both on more moderate vertical routes and well for overhanding systems boards.

Date: 6/25/2020 12:11 PM

Was this review helpful? Yes No (0/0)

no brainer at this price

These holds are awesome (and cheap). I use them on my 40 degree wall and they are more than incut enough to really be able to bear down and pull hard on these things. I can usually get 4 fingers on them if I'm precise. Any v4+ climber could probably get good use out of them at this angle.

Date: 7/8/2020 10:00 PM

Was this review helpful? Yes No (1/0)

Nice incut, nice size

Set on a 22 degree system wall, these are pretty usable for me (v3-5 climber). I can hang statically, move dynamically, move laterally, etc. off these. I set some of these dead-flat, and some at joint-friendly angles, and I like using both angles. I have large hands and can only fit 3 fingers--nice way to add exertion without just decreasing edges.

Date: 7/13/2020 7:51 AM

Was this review helpful? Yes No (0/0)

Awesome Crimps

Hold is 3/4 pad and ever so slightly incut. Larger hands will get 3 fingers, medium and small hands can squeeze 4 fingers on. Texture is awesome. Installed on 38 degree wall. V3-4 minimum, can make much harder.

Date: 8/1/2020 6:40 PM

Was this review helpful? Yes No (0/0)

Great Price Great feel

Threw these on my 27 degree system wall as a bump-to hold to practice my speed and accuracy. Very positive feel for 1 pad/3 fingers. Even make a great foot hold or Thumb catcher. Ill be getting more of these for sure.

Date: 9/10/2020 11:08 AM

Was this review helpful? Yes No (0/0)

Great & Cheap!

I am a 5.11 climber and have these on a 30 degree home wall with a vertical kicker. I have larger hands and can only fit 3 fingers. Fairly positive depsite their small size. I use them in my projects

Date: 9/13/2020 8:41 PM

Was this review helpful? Yes No (0/0)

Perfect Incuts!

I was looking for a good set of crimps for my spray wall at home, I wanted something challenging but decent enough to not need to rely soley on friction. These are perfect! My wall is a 50 degree overhang and I find that I need to focus a lot on where my weight is shifted in order to get the most from these crimps. I can tell that these holds will perfect for breaking into the V7 grade for me.

Date: 9/21/2020 2:43 PM

Was this review helpful? Yes No (0/0)

Also Bought

$8.58

System Crimps #1 (Bolt-on) (Set of 2)

A full pad incut edge suitable for a hang board or a system wall. Great for a beginner hang board as an intro to crimping or for some power endurance pull down action in your next system session.

Sold as a set of 2.

$7.63

System Crimps #9 (Bolt-on) (Set of 2)

T-nut (4-Prong Zinc)

T-nut (Round Base Zinc)

System Feet - #9 (Bolt-on) (Set of 2)

System Crimps #3 (Bolt-on) (Set of 2)

System Crimps #1 (Bolt-on) (Set of 2)