Dry Tooling 5 Small Golfus Crimps Set #1

$44.84
Intermediate-level pick engagement.
*

Wall Type determines the required bolt length needed to pass through the hold and the climbing wall. If you are not purchasing hardware, this option doesn't matter.

*
* SEE COLOR CHART

Overview

  • WALL ANGLE: Useful on vertical walls to 35-degree overhanging walls. 
  • SIZE:  The average hold measures 4" wide x 2-1/2" tall x 1" standing off the wall.
  • DURABILITY: A custom mix of fine-grain crushed stone and polyurethane resin to resemble the hardness of natural limestone rock. The result is a "hard" resin surface that tolerates the sharpness of ice-climbing axes. 
  • DISCLAIMER:  Use Drytooling resin holds only with your picks, not your crampons. This product does wear. 
  • RESPONSIBILITY: Please be aware that it is unacceptable to drytool at your local crag. Drytooling damages natural rock. You should drytool only in places where the local community has dedicated the area and never on established rock climbing routes. 
  • DRY TOOLING ETHICS: What You Should Know before heading out.

Description: 

The incuts in this set are around 25 degrees, and the depth of the incut averages 1/2" deep. 

They are deep and positive for good pick engagement. This offers good placement for intermediate climbers on lower-angled terrain. 

The backplate ranges from 3/4" to 1" above the incut. 

Product tags