10-degree slope on the incut for both hands.

Wall Type determines the required bolt length needed to pass through the hold and the climbing wall. If you are not purchasing hardware, this option doesn't matter.



The Double Hander (Pentagon) has room for both hands. It has a 10-degree incut making it most comfortable in vertical to steep terrain. Quite a challenge in a roof as it down-slopes the 10 degrees in the horizontal orientation.

  • measures 8-1/2" wide x 8-1/2" tall x 3-1/2" off the wall
  • solid poured hold that will last forever even when being subjected to massive high-leverage dyno moves
  • best suited in low angle to steep terrain