10-degree slope on the incut for both hands.
*

Wall Type determines the required bolt length needed to pass through the hold and the climbing wall. If you are not purchasing hardware, this option doesn't matter.

*
* SEE COLOR CHART

Overview

The Double Hander (Circle) has room for both hands. It has a 10-degree incut making it most comfortable in vertical to steep terrain. Quite a challenge in a roof as it down-slopes the 10 degrees in the horizontal orientation.

  • measures 8.5" wide x 8.5" tall x 4.5" off the wall
  • solid poured hold that will last forever even when being subjected to massive high-leverage dyno moves
  • best suited in low angle to steep terrain